AL-750SA

AL-750SA

Linear Shaft Motor

Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10%

1/1000 High Resolution Signal Process

High resolution in linear scale, achieve more smooth velocity control, and enhance the stability of position control, best match up contouring accuracy.

Stable Discharge Board (SD-Master)

Irregular Thickness Cutting

The AccuteX intelligent discharge unit is capable of dealing with the changing conditions in workpiece thickness and water flushing situations, featuring high cutting speed, and free from wire breaking problems.

PCD Cutting & Graphite Machining Power supply

The collapse of workpiece edge by wire cut can be controlled within minimum range along with high speed machining.

Max. Workpiece SizeL x W x H (mm)1190x720x295
Max. Workpiece Weight (Kg)750
X/Y Stroke (mm)750×500
U/V Stroke (mm)100×100
Z Stroke (mm)300
Max. Cutting Taper (H=100)±21°
Wire Spool Weight (Kg)10
Footprint (mm)W x D x H3000x3200x2250
Water System Capacity (L)1060
Machine Weight (Kg)4300


(*)To acquire the optimum stable cutting performance,the suggested-maximum height of cutting workpiece is the Z axis stroke minus 30mm.



Controller Specifications

Blacklash compensation  WINDOWS CE
  Control Device  64-bit Industrial PC
Memory Device  1GB CF Card
  Screen Display Device  17” Color TFT Touch Screen
  Data Input  Keyboard, RS-232, USB, Ethernet, FTP
  Simultaneous Axes  4 Axes / 5 Axes (Option on W Axis)
  No. of Control Axes  5 Axes / 6 Axes (Option on W Axis)
  Min. Command Unit  0.0001mm
  Max. Command Range  ±9999.9999 mm
  Command Type  mm / inch
  Cutting Data Memory  99999 sets
  Ignition Power Supply  32 Steps,53V~138V
  On time  24 Steps
  Off time  43 Stpes
  Discharge Mode  Rough Cut / Skim Cut / Fine Cut

Controller Functions



Backlash compensationConstant / Servo feedDifferent shape interpolationAuto position (edge, center)
Linear / Circular interpolationAuto power recoveryBackground editSoft limit
Cutting path displayTrace to break pointStar point returnCorner control function
Retrace to start pointReference point returnBreak point returnDiagnosis
Reference point settingTaper cuttingAuto cornerZ axis software limit
Multi-blocks skipMaintenance memoProgram edit / copy / deleteManual data input
Cutting logAxis exchangeRotationAuto / Manual feed
MirrorDry runSingle blockShort back
Optional stopBlock stopSub programWire consumption offset
Pitch compensationParallel compensation2nd. Soft limitAnti-Collision

Standard Accessories



Upper / Lower Flushing NozzleDiamond GuideConductor Plate
Diamond Guide Remove JigBrass WireTool Box
Waste Wire BinIon Resin TankIon Exchange Resin
Paper FilterVertical Alignment JigWater Chiller
SD MasterAuto Wire Threading (AWT) 

Optional Accessories



Spray mist LubricatorPilot LampRemote Master
Safety Door InterlockPCD / Graphite Cutting0.1mm Wire Application
Transformer45Kg Wire Jumbo FeederAuto Voltage Stabilizer
X/Y Linear Scale6th Axis Package (W axis)Alarm Messenger
MST (AL-400SA/500SA/560SA/600AS)High Pressure Water Jet Threading (Not Available with Anti-Collision on Z Axis)

※ All the specifications are subject to change without prior notice.